This incubator was designed to minimize contamination and be operational within hours of installation. This slim, lightweight incubator is easily repositioned with minimal downtime and is well-suited for multiple users. Three temperature control settings (main chamber, external door, and front liner) minimize condensation and yield precise temperature uniformity with no unwelcome temperature gradients. Our unique Class 100 HEPA filtration system removes 99.97% of all airborne microbes and isolated particulates 0.3 microns or larger. The patented copper housing around the filter is designed to destroy microbes entrapped in the filter. Additional anti-contamination features include a stainless steel chamber with easy-to-clean coved corners, our Quick Clean Shelf System which disassembles without tools in less than a minute, and our Non-Tip Shelf System to reduce spills. A separate digital keypad with large, bright LEDs (for CO2 and temperature) is highly visible on the front panel. The audible alarms can be muted easily, and the redundant safety system for temperature protects samples from overheating. In addition, the CO2 gas supply is protected by a PID with an infrared sensor that is extremely quick to recover, a door switch that automatically turns off the gas when the door is opened, and a sample port on the side to help minimize waste during CO2 calibration.

Temp. Range: Ambient +8°C to 60°C; CO2 Range: 0-20%; Relative Humidity Range: up to 95%, Exterior Dimensions: 27.3 x 28.5 x 75.5in. (69.3 x 72.4 x 191.7cm); Chamber Dimensions: 20.5 x 19.7 x 21.5in. (52.1 x 50 x 54.6cm) per chamber.